english spanish

seemee® Mesh Standard is designed to maximize the overall cost and performance of a mesh substrate. Mesh Standard provides excellent print results, optimum wind flow and competitive cost. An excellent print result on all solvent-base digital systems is achieved through a unique, universal top- coat. Aplications: Digital Printing.


  • GESS_186
  • GESS_209
  • Market_St_June_1st_013
  • Pure_Eco_Banner_Olympics_A
  • bbt_02
  • camelkiss
  • cola
  • henninger_tower
  • trop_sprint1_106112

Product Spec Sheet

Properties Test Method International USA
Base Fabric DIN 60001 Polyester Polyester
Yarn DIN EN ISO 2060 1100 x 1100 dtex 1000 x 1000 denier
Base Fabric Weight DIN EN ISO 2286-2 75 g/m ² 2.5 oz /yd²
Type of Coating   PVC Both Sides PVC Both Sides
Total Weight DIN EN ISO 2286-2 230 g/m ² 6.75 oz / yd²
Width DIN EN ISO 2286-1 320cm / 500cm 10'6", 16'4"
Tensile Strength DIN 53354 1000 / 900 (N/5cm) 110/ 100 (lb/in)
Tear Strength DIN 53363 250/200 (N) 54/42 lbs
Air Flow (Permeability) N/A 5290 Liter sq/m per second at 2 milibar  


pdfMesh_Standard.pdf566.24 KB

The above information on physical and chemical characteristics is based on laboratory tests and is believed to be reliable at the time of printing. The values are intended as a source of information and do not constitute a warranty. The producer should independently determine, prior to use, the suitability of this material for his/her specific purposes.